Smith-Blair
Smith-Blair 274-00000480-000 Short Bell Joint Leak Clamp, 4" Pipe, Up to 150 psi, Ductile Iron, Flexi-Coat® Fusion Bonded Epoxy
Sign In to View Pricing & Availability
- Smith-Blair 274 bell joint leak clamps provide a fast, economical means of sealing or preventing leaks in cast iron bell, and spigot caulked or rubber ring joints. The design of the "Kee-Lok"® gaskets and bell-spigot rings enable a single clamp to fit both caulked and rubber ring joints on virtually all classes and brands of cast iron pipe in nominal sizes up to 36 in. They are also suitable for use on AWWA C-900 PVC pipe thru 24 in (longer bolts are required).
Smith-Blair Bell Joint Leak Clamp, Short, Series 274, 4 in Pipe, Up to 150 psi, 4.8 to 5 in Outside Dia, Ductile Iron, Flexi-Coat® Fusion Bonded Epoxy, -20 to 180 deg F
- Designed to fit both caulked or rubber ring joints in virtually all classes and brands of cast iron or ductile iron pipe within same nominal size
- Suitable for use on C900 and C905 PVC through 24 in with the use of longer bolts-DR 18 minimum
- Kee-Lok® gasket design eliminates need for field cutting gaskets, the ends are easily joined, no need of staples, tongs, tape or other gadgets to hold the gasket ends together
- Flexi-Coat® fusion-bonded epoxy finish is standard for great corrosion resistance
- Can be installed without interrupting the flow of the pipeline
- Front and back pieces are interchangeable
- All bell-spigot pieces are identical, making installation easier
- Not recommended for PVC pipe
- Ductile Iron Bell-Spigot Ring/Bell-Spigot Section/Section Connector/Range Spacer, HSLA Carbon Steel Restraint Rod/Nut, Nitrile (Buna-N) Gasket and (4) 5/8 x 9 in Low Alloy Steel Bolts
- FinishFlexi-Coat® Fusion Bonded EpoxyLoad CapacityUp to 150 psiMaterialDuctile IronPipe Size4 inManufacturerXylemManufacturer #274-00000480-000Outside Diameter4.8 to 5 inSeries274Temperature Rating-20 to 180 deg FTypeShort