Sign In to View Pricing & Availability
- Ecoflex potable PEX single pipes are designed for potable-water distribution applications. The Uponor AquaPEX service pipes in Ecoflex potable PEX piping are manufactured by the Engel-method (PEX-a) process and are listed to ASTM F876 and F877. The pipe is surrounded by multi-layer, closed-cell, PEX-foam insulation and a water-resistant, corrugated HDPE jacket, making it ideal for direct-burial applications.
Uponor Ecoflex® Potable Pipe, Single, 3 in PEX Nominal, 2.398 in Inside Dia, 3-1/8 in Outside Dia, 1.93 in Wall Thickness, 0.25 Btu-in/hr-sq-ft-deg F, 8.96, 73 to 200 deg F, Polyethylene
- Corrugated, seamless high-density polyethylene (HDPE), UV-protected jacket
- Multilayered, closed-cell, crosslinked polyethylene (PEX) foam insulation
- 0.1 g/100 sq in/day vapour permeability
- 32 in bend radius
- Install Ecoflex potable PEX single in hot or cold potable-water applications
- Join pipes using Uponor ProPEX® or WIPEXTM fittings
- Ecoflex end caps are required on all exposed ends of Ecoflex pipes to avoid ground water contamination
- Crosslinked polyethylene material
- SDR-9 engel method of manufacture
- Use ProPEX fittings up to 3 in or WIPEX fittings for the whole range
- 7.9 in Jacket, 300 ft Coil
- MaterialPolyethyleneR Factor8.96TypeSingleWall Thickness1.93 inInside Diameter2.398ManufacturerUponorManufacturer #5217930Outside Diameter3-1/8Temperature Rating73 to 200 deg FThermal Conductivity0.25