Asahi-America® | Asahi-America® 1601010 T-21 Ball Valve, 1" Nominal, Socket x Threaded End Style, PVC Body, Full Port, EPDM Softgoods

Asahi-America®

Asahi-America® 1601010 T-21 Ball Valve, 1" Nominal, Socket x Threaded End Style, PVC Body, Full Port, EPDM Softgoods

Item #ASA1601010

MFG #1601010

BrandAsahi-America®

: Type-21/21a ball valves are corrosion resistant plastic manual true union design quarter turn valves with hyperbolic flow characteristics, low pressure drops and reliable sealing. They offer relatively poor flow control and are typically used in on/off applications. They are excellent for use in clean fluid service applications with very little to no suspended solids. Type-21/21a ball valves are well suited for a wide variety of fluid flow applications. True Union ball valves can be lifted from the line, without having to move the piping, simply by loosening the two union nuts. The valves can be disassembled, and parts may be replaced. They can be pneumatically or electrically actuated in our factory or in the field.

Asahi-America® Ball Valve, Series: T-21, 1 in Nominal, Socket x Threaded, 230 psi, 30 to 210 deg F, Full Port, PVC Ball, PVC Body, PVC Stem and PTFE Seat Trim, EPDM Softgoods

: Pressure rated up to 230 psi (PVC, CPVC, PVDF)

Double O-Ring seals on stem for added protection

1/2 to 2 in full bore

Full vacuum rated all sizes

Blocks in two directions upstream and downstream leaving full pressure on the opposite end of the valve

Integrally molded ISO mounting pad for both manual and actuated operations

Integrally molded base pad to mount valves Securely or panel mounting

PTFE seats with elastomeric backing cushions ensure bubble-tight shut-off and a low fixed torque while at the same time compensating for wear

True Union design for easier installation or repairs without expanding the pipe system

Built-in spanner wrench on the handle for valve disassembly and assembly

Two sets of end connectors (socket and threaded) included with all PVC and CPVC valves in sizes 1/2 to 2 in

CPVC threaded end connectors on sizes 1/2 to 1 in come with stainless steel reinforcing rings

New PTFE Seat design - Facilitates easier field maintenance if required

Tapered O-Ring groove - Helps to Keep the end connector O-Rings on the valve body during installation

Body flats - flats have been added to either side of the valve body where a wrench can be applied to prevent the valve body from turning when the union nuts are tightened

ABS Product Approved for use in marine and offshore applications

EPDM O-ring
: Body MaterialPVC
End StyleSocket x Thread
Nominal Size1 in
Port TypeFull
Softgoods MaterialEPDM
Ball MaterialPVC
ManufacturerAsahi-America
Manufacturer #1601010
Pressure Rating230 psi
SeriesT-21
Temperature Rating30 to 210 degF
Trim MaterialPVC Stem and PTFE Seat

Asahi-America® 1601010 T-21 Ball Valve, 1" Nominal, Socket x Threaded End Style, PVC Body, Full Port, EPDM Softgoods

About Us

Customer Service

Learn More