Sign In to View Pricing & Availability
- For use with copper, brass, aluminum, steel, and plastic tube provided and acceptable flare could be generated with the material.
- Vacuum and pressures of 5,000 psi can be handled depending upon the size, material, and conditions. The valve core is typically the limiting restriction at 800 psi max. working pressure.
- Long nuts are recommended when vibration is a factor. Tubing should be double-flared in extreme applications to minimize flare thinning on over-tightening.
- Pipe sizes listed are standard nominal pipe size and threads are to dry seal taper pipe standards.
- JB provides flare fitting to SAE Standard J513 whenever possible. Slight deviations can occur when full compliance fittings are not available.
- Long dry seal pipe threads minimize leakage and provide more clearance for tightening flare nuts.
- Resistant to oils, alkylates, and diluted mineral acids.
- Domestic / ImportDomesticMaterialBRASSConnection Size1/4 x 1/2 inConnection TypeAdapterEnd StyleFlare x Male PipeManufacturerJB IndustriesManufacturer #U1-4DPressure Rating3,000 psiTemperature Rating-20 to 220 deg F