Sign In to View Pricing & Availability
- All thermoplastic basket strainers shall be fabricated from PVC type I, ASTM D1784 cell classification 12454 or CPVC Type IV, ASTM D1784 cell classification 23447 material. All O-Rings shall be EPDM or FKM strainer baskets shall be perforated PVC, CPVC, type 316 stainless steel or type 316 stainless steel wire mesh. Standard strainer perforations shall be 1/8 in or 3/32 in with a minimum open area ratio of 6 : 1 or specified perforation/mesh opening. Basket strainer sizes 2 in - 8 in shall have quick release clamp retained bonnet, sizes 10 in - 12 in shall have bolt-on bonnet. All basket strainers shall have pressure release valve and safety pressure gauge. Unit shall be equipped with O-ring sealed drain plug at lower end. Basket strainer sizes 2 in - 8 in shall be pressure rated at 150 psi, sizes 10 in - 12 in to 50 psi for water at 73 deg F as manufactured by Spears® manufacturing company.
Spears® Basket Strainer, 12 in Nominal, 10-3/8 in Overall Width, 10-1/8 in Overall Height, Flange, PVC, Gray, Domestic
- Chemical and corrosion-resistant PVC or CPVC construction
- Convenient quick-release clamp for easy bonnet removal (Bolt-on bonnet on sizes 10 and 12 in)
- Includes pressure release valve and 0 to 160 psi safety pressure gauge (o-ring sealed plugs provided if valve/gauge not used)
- High volume 6:1 open area ratio
- O-ring sealed drain plug
- 140 deg F maximum temperature
- 150 psi at 73 deg F in water
- 1/8 in mesh code
- FKM O-ring seal
- ColorGrayConnection TypeflangeDomestic / ImportDomesticMaterialPVCNominal Size12 inManufacturerSpears ManufacturingManufacturer #BS33P6-010Overall Height10-1/8 inOverall Width10-3/8 in