Sign In to View Pricing & Availability
- Our Best Seller in sewage pumps, the fully automatic Model M267 Sewage Pump is designed to remove raw sewage and wastewater in sewage ejector applications. The professional-grade, 1/2 HP M267 is a time-tested and reliable sewage pump. Known as the "Waste-Mate," the M267 is a fully automatic float-operated sewage pump. The white polypropylene float is solid so it cannot become waterlogged. This ensures that it is always buoyant and able to turn the pump on when necessary. The pump's vortex impeller allows it to pass 2" spherical solids. The impeller's clearance in relation to the pump housing allows water and solids to pass freely through the pump. This combination of design features lessens the chance of clogging and downtime. The Model 267's switch case, motor housing, pump housing, and base are each constructed of cast iron. The pump's identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 267 is able to withstand the most demanding sewage ejector applications. Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.
Submersible Pump, Series: Waste-Mate 260, 128 gpm, 2 or 3 in NPT Outlet, 21-1/2 ft Maximum Head, 1/2 hp, 115 VAC, 10.4 A, 60 Hz, 1750 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Sleeve Bearing, Cast Iron, 14-5/16 in H
- Float-operated and 2-pole mechanical switch
- Durable cast construction, ASTM Class 25 cast iron switch case and pump housing
- Non-clogging vortex impeller design, engineered plastic impeller with metal inserts (1 ph), model 267 available with cast iron impeller (standard on 3 ph models)
- Not affected by materials normally found in drainage and sewage pumps
- Stainless steel screws, bolts, handle, guard, arm and seal assembly
- Neoprene square ring and gasket
- Oil-filled, hermetically-sealed motor
- Oil-lubricated bearings
- Carbon and ceramic shaft seal
- Corrosion-resistant, powder coated epoxy finish
- Completely submersible
- Watertight and dust-tight
- Automatic and non-automatic models available
- Models available packaged with piggyback variable level float switch
- Automatic reset thermal overload protection (1 Ph only)
- 12 in on point, 4 in off point
- Minimum recommended basin size (small load applications) - simplex 18 in x 30 in (45.7 x 76.2 cm), duplex 30 in x 36 in (76.2 x 91.4 cm)
- High water alarms available
- 10 in auto/15 in non auto, 3-wire neoprene cord and plug
- Cap/motor housing/pump housing cast iron, base cast iron or engineered plastic
- Flow Rate115 gpmMaterialCast IronMotor HP1/2 HPNon-Automatic / AutomaticAutomaticOutlet Size2 in Female or 3 in NPTBearing TypeSleeveCord Length10 ftCord Type3-Wire NeopreneFrequency Rating60Impeller TypeNon-Clogging VortexManufacturerZoeller CompanyManufacturer #267-0001Maximum Head21-1/2 ftPhase1SeriesWaste-MateSpeed1725 rpmTemperature Rating130 deg FVoltage Rating115 V