
Sign In to View Pricing & Availability
- The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
Powers® Power-Stud® Wedge Expansion Anchor, 5/8 in Dia, 8-1/2 in Overall Length, 7 in Thread Length, Carbon Steel, Zinc Plated, 2-3/4 in Minimum Embedment Depth, 5/8 in Drill, 5/8-11, Threaded Stud Head, UNC
- Fully threaded, heavy and medium duty all-purpose anchor
- Nominal drill bit diameter same as anchor diameter
- Length ID stamped on each threaded anchor
- Anchors can be installed through the fixture, hole spotting not required
- Chamfered impact section prevents damage to threads
- Length of holes can be over-drilled or bottomless
- Clip design prevents spinning during installation
- 35/64 in nut height
- 1-3/4 in OD washer
- 15/16 in wrench
- 90 ft-lbs tightening torque
- 11/16 in fixture clearance hole
- Nut and Washer
- Diameter5/8 inFinishZinc PlatedMaterialCarbon SteelOverall Length8-1/2 inThread Length7 inDrill Size5/8 inHead TypeThreaded StudManufacturerPowers FastenersManufacturer #7438Minimum Embedment Depth2-3/4 inThread Size5/8-11 inThread TypeUNC