Bell & Gossett

Bell & Gossett Red Ring® Monoflo® 108120 Tee Fitting, 1 x 1/2 in Nominal, Solder End Style, 150 psig Pressure, Copper

BEL108120 MFG #: 108120
Bell & Gossett Red Ring® Monoflo® 108120 Tee Fitting, 1 x 1/2 in Nominal, Solder End Style, 150 psig Pressure, Copper
  • End Style: solder
  • Material: Copper
  • Nominal Size: 1 x 1/2 in
  • Pressure Rating: 150 psig
  • Length: 2-9/16 in
  • Manufacturer: Xylem
  • Manufacturer #: 108120
  • Temperature Rating: 300 deg F
Bell & Gossett Monoflo® Fittings make possible the use of a single pipe to act as both a supply and return main. These Fittings connect the risers to the main and assure proper diversion of water into each heating unit, whether radiator, convector or baseboard, and regardless of its position in the system. Except for the 3/4 in fitting, they can be installed at either the return or supply riser or both depending on the pressure drop through the side branch circuit and terminal unit, with the other riser connection being a common tee. Red Ring® Monoflo® fittings can be used for most installations where cast iron or non-ferrous baseboards, free standing radiation, or convectors are installed.

Bell & Gossett Red Ring® Monoflo® Tee Fitting, 1 x 1/2 in Nominal, Solder, 2-9/16 in Length, 150 psig, 300 deg F, Copper
  • Features
  • Copper Red Ring® Monoflo® fittings let you use a single pipe to serve as both supply and return main
  • Connect risers to the main, assuring proper division of water to each heating unit regardless of type and its position in the system
  • Recommended for most installations including cast iron non-ferrous baseboards, free-standing radiation or convectors
  • Only one fitting is needed for most installations for adequate diversion for upfeed radiation
  • For most applications, a second fitting can be used if higher resistance is required