Powers®

Powers® Power-Stud+® SD1 7412SD1 Expansion Wedge Anchor, 3/8 in Dia, 2-3/4 in OAL, 1-3/8 in L Thread, Carbon Steel, Zinc Plated

ACTPOW07412SD1 MFG #: 7412SD1
  • Diameter: 3/8 in
  • Finish: Zinc Plated
  • Material: Carbon Steel
  • Overall Length: 2-3/4 in
  • Thread Length: 1-3/8 in
  • Drill Size: 3/8 in
  • Head Type: Hex
  • Manufacturer: Powers Fasteners
  • Manufacturer #: 7412SD1
  • Minimum Embedment Depth: 1-5/8 in
  • Shear Strength: 2540 lb
  • Tensile Strength: 2685 lb
  • Thread Size: 3/8-16 in
  • Thread Type: UNC
  • Type: Expansion
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.

Powers® Power-Stud+® SD1 Wedge Anchor, Expansion, 3/8 in Dia, 2-3/4 in Overall Length, 1-3/8 in Thread Length, Carbon Steel, Zinc Plated, 1-5/8 in Minimum Embedment Depth, 3/8 in Drill, 3/8-16, Hex Head, UNC, 2540 lb Shear Strength, 2685 lb Tensile
  • Features
  • Includes
  • Consistent performance in high and low strength concrete
  • Nominal drill bit size is the same as the anchor diameter
  • Anchor can be installed through standard fixture holes
  • Anchor design allows for follow-up expansion after setting under tensile loading
  • Length ID code and identifying marking stamped on head of each anchor
  • Anchor design allows for follow-up expansion after setting under tensile loading ultimate pullout 5440 lb
  • Normal weight concrete, structural sand-light weight concrete, concrete over steel deck and grouted concrete masonry are applicable materials
Nut and Washer