Sign In to View Pricing & Availability
- Unlike metal, plastics never rust, scale, or pit — they virtually last forever. Thermoplastics are abrasion resistant, chemical and corrosion resistant, nonconductive, lightweight, and operate at lower friction-loss levels than metals. Moreover, plastics are nontoxic and environmentally safe. Adding these benefits with ease of installation at substantially lower costs, thermoplastic piping system components are the proven choice for years of maintenance free system operations.
Spears® Pipe Saddle, Clamp-On, 6 x 2 in Nominal, 1-Socket, 2-1/4 in Hole Dia, SCH 80/XH, 200 psi, 73 deg F, Stainless Steel Bolt, PVC Clamp, 7-3/4 in W, Gray, Domestic
- 2-1/4 in Dia hole saw
- FKM O-ring seal and stainless steel hardware
- Molded PVC
- Type 1 FKM O-Ring with a minimum of 66% fluorine content for the best balance of overall properties.
- FKM exhibits a very broad range of chemical resistance, including petroleum oils, di-ester based lubricants, silicate fluids and greases, halogenated hydrocarbons, and mineral acids.
- PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products.
- PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones.
- The maximum recommended service temperature of PVC products is 140° F (60° C).
- Domestic / ImportDomesticNominal Size6 x 2 inBoltMaterialStainless SteelBoltNumber4BoltTorque10 FT/LBSColorGrayEnd StyleSaddle x SocketFitting / Connector TypeCLAMPHoleDiameter2-1/4 inManufacturerSpears ManufacturingManufacturer #866SV-528MaterialPVCSchedule RatingSCH80