Zoeller® 98-0001 M98 Flow-Mate Sump & Effluent Pump, Automatic, 1/2 hp, 115V, Cast Iron

ZOEM98 MFG #: 98-0001
  • Maximum Head: 23 ft
  • Motor HP: 1/2 HP
  • Voltage Rating: 115 V
  • Amperage Rating: 9.4 A
  • Bearing Type: Sleeve
  • Cord Length: 15 ft
  • Cord Type: 3-Wire Neoprene
  • Flow Rate: 72 gpm
  • Frequency Rating: 60
  • Impeller Type: Non-Clogging Vortex
  • Manufacturer: Zoeller Company
  • Manufacturer #: 98-0001
  • Material: Cast Iron
  • Non-Automatic / Automatic: Automatic
  • Outlet Size: 1-1/2 in NPT
  • Phase: 1
  • Series: Flow-Mate
  • Speed: 1725 rpm
  • Temperature Rating: 130 degF
This "Flow-Mate" model submersible pump is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. This durable cast iron pump includes a powder coated epoxy finish to prevent corrosion and is designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feature of every pump, making it one of the most reliable in the industry.

Effluent or Dewatering Submersible Pump, Automatic, Series: Flow-Mate M98, 73 gpm, 1-1/2 in Outlet, 23 ft Maximum Head, 1/2 hp, 115/230 VAC, 9.4 A, 60 Hz, 1725 rpm Motor, Non-Clogging Vortex Impeller, 130 deg F, Oil Fed Bearing, Cast Iron, 12-1/16 in H x 10-1/8 in W
  • Features
  • Float operated 2-pole mechanical switch
  • Corrosion resistant, powder coated epoxy finish
  • No sheet metal parts to rust or corrode
  • Stainless steel screws, guard, handle, arm and seal assembly
  • No screens to clog, all castings are cast iron class 25 to 30 25000 tensile strength, watertight, neoprene square ring between motor and pump housing
  • Permanent split capacitor motor, oil filled and hermetically-sealed, automatic reset thermal overload protection
  • Watertight, neoprene square ring between motor and pump housing
  • Cast iron switch case, motor, pump housing and base, bearings, upper and lower oil fed cast iron, carbon and ceramic shaft seal
  • Entire unit pressure tested after assembly
  • Class B insulation, 9-1/2 in/3 in auto On/Off points
  • 1/2 in spherical solids handling, 15 ft cord, oil filled cooling
  • Auto reset thermal overload motor protection
  • Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket
  • AISI 1215 cold roll steel motor shaft
  • Single phase
  • 1-1/2 in NPT discharge