Sign In to View Pricing & Availability
- Dixon® Hose Mender, Fitting/Connector Type: Mender, 1-1/4 in Nominal Size, 4-1/32 in Length, 1-15/16 in Barb Length, 316 Stainless Steel, Domestic
- Mender for connecting two hoses of the same diameter in a straight run
- Hose barbs on both ends
- 316 stainless steel for higher strength and greater corrosion resistance than 304 stainless steel
- Barbed fitting for a tight seal on hoses
- For use with a hose clamps or crimp sleeve or ferrule
- Menders are not for compressible products such as air, nitrogen or steam
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
- Domestic / ImportDomesticFitting / Connector TypeMenderMaterial316 Stainless SteelNominal Size1-1/4 inBarb Length1-15/16Length4-1/32 inManufacturerDixon Valve & CouplingManufacturer #RDM16