A.O. Smith® 100114104 PCG-100 High Recovery 98 Gallon Gas Water Heater, Natural Gas Fuel, Atmospheric Vent, Tall

AOSPCG100N MFG #: 100114104
  • Recovery Rate: 81 gph at 90 deg F
  • Tall or Short: Tall
  • Tank Capacity: 98 gal
  • Vent Type: Atmospheric Vent
  • Dimensions: 27-3/4 in Dia x 65 in H
  • Manufacturer: A.O. Smith
  • Manufacturer #: 100114104
  • Pressure Rating: 150 psi
  • Series: PCG-100
The ProMax® High Recovery Atmospheric Vent gas water heater is designed for reliable performance, reduced NOx emissions and it can deliver up to 116 gallons of water in the first hour of operation.

Looking for model-specific repair or replacement parts? Enter the unit’s serial number into the A.O. Smith Parts Finder.

A.O. Smith® ProMax® Gas Water Heater, High Recovery, Series: PCG-100, 75100 Btu/hr Heating, Natural Gas, 1/2 in Gas Connection, 98 gal Tank, Piezo Pushbutton Ignition, Atmospheric Vent, 4 in Vent, 81 gph at 90 deg F Recovery, Energy Factor: 0.8, 1-1/4 in Water Connection, 150 psi, Tall or Short: Tall, Ultra Low Nox: No, 27-3/4 in Dia x 65 in H
  • Features
  • Highest recoveries - Capacity/input combinations up to 98 gal/75100 Btu produce recoveries up to 81 gph
  • Fully automatic controls with safety shutoff accurate, dependable control system requires no electric connections
  • Fixed automatic gas shutoff device for added safety
  • Green Choice® gas burner - Patented "Eco-Friendly" design reduces NOx emissions by up to 33% and complies with low- NOx emission requirements of less than 40 ng/J
  • Dynaclean™ diffuser dip tube - Reduces lime and sediment build up and maximizes hot water output, made from long-lasting PEX cross-linked polymer
  • Coregard™ anode rods have a stainless steel core that extends the life of the anode rod allowing superior tank protection for longer than standard anode rods
  • Pushbutton piezo ignitor - Makes lighting the pilot fast and easy with one-hand pushbutton spark ignition (Natural gas only)
  • Nipples - Factory installed for faster installation
  • Blue Diamond® glass coating - Provides superior corrosion resistance compared to industry standard glass lining
  • Enhanced-flow brass drain valve - Our residential water heaters have a solid brass, tamper resistant, enhanced-flow, ball type, drain valve
  • Uses a standard female hose fitting that allows for fast and easy draining during maintenance
  • Designed for easy operation, this valve includes an integral screwdriver slot that features a 1/4 turn (open/close) radius, which not only permits full straight-through water flow but also a quick and positive shut off
  • Design listed By CSA International - Certified at 300 psi test pressure and 150 psi working pressure
  • Listed according to ANSI Z21.10.3 CSA 4.3 standards governing storage tank type gas water heaters
  • Standard vent
  • Certified from sea level to 7700 ft elevation